|
Plastic Beaker Set
|
|
Tri-Pour Beaker - 5 Sizes
|
|
Plastic Beakers, Griffin Style - 7 Sizes
|
|
Polypropylene Beakers, New Style with Spout - 6 Sizes
|
|
Griffin Low Form Polypropylene Beakers - 9 Sizes
|
Usually Ships in 24 Hours
|
|
|
Usually Ships in 24 Hours
|
|
|
Usually Ships in 24 Hours
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
This handy set for any laboratory contains 5 graduated polypropylene beakers in sizes 50ml, 100ml, 250ml, 500ml and 1000ml.
|
Singles Available
Disposable beakers are economical for even single-use operation. Unique and convenient tri-corner design provides three dripless pouring spouts. Made of polypropylene for exceptional
|
Singles Available
Classic Griffin style plastic beakers with small spout and molded in polypropylene, have excellent clarity and very good chemical resistance. Griffin Style Beakers nest without sticking together.
|
Singles Available
Plastic New Style beakers feature tapered spouts for easier pouring of solutions. They are autoclavable and feature raised graduations on the outer surface.
|
Griffin low form polypropylene beakers are translucent, chemical resistant and will stack without sticking together. Raised numeric graduations show approximate volume (+-5%). All sizes are steam autoclavable at 121 C (250 F).
|
|
|
|
Plastic Graduated Beakers, PMP (TPX)
|
|
Beaker Tongs
|
|
Glass Beaker Set
|
|
Borosil® Glass Beakers, Low Form - 15 Sizes
|
|
Borosil Glass Beakers, Berzelius, tall form with spout - 8 Sizes
|
Usually Ships in 24 Hours
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 24 Hours
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
Singles Available
Material: PMP (TPX) Crystal clear, autoclavable beakers feature excellent chemical resistance. Permanent graduations are molded in. Manufactured per ISO
|
Beaker tongs feature strong zinc-plated steel construction with flat riveted joints and vinyl coated sleeves that open to 7”. Tongs can handle beakers from 50ml
|
Singles Available
An ideal starter set for any laboratory, this set contains 5 borosilicate glass beakers in sizes 50ml, 100ml, 250ml, 600ml, and 1000ml. Shipping weight is 2.10
|
Borosil® brand beakers are made from Type I borosilicate glass. Beakers feature heavy and uniform wall thickness; spouts designed for easy pouring, and
|
Borosil® brand beakers are made from Type I borosilicate glass. Beakers feature heavy and uniform wall thickness; spouts designed for easy pouring, and
|
|
|
|
Watch Glasses - 9 Sizes
|
|
Large Volume Beaker - 2 Sizes
|
|
Tubing Holder
|
|
Thermometer Holder
|
|
Weighted Beaker/Flask Holders - 2 Sizes
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Use these high quality watch glasses to prevent dust or other particles entering beakers or as an evaporating surface; the watch glass does not completely seal the beaker, and so gas exchanges still occur. Made from clear flint glass (1.8 to 2.0 mm thick)
|
These graduated plastic beakers feature flared rims and spouts for quick, easy pouring when large volumes are handled. Made of polypropylene, they offer good chemical resistance and are steam autoclavable at 121ºC (250ºF).
|
Hold flexible tubing steady in beakers or pitchers with this polycarbonate clip. It fits securely onto the edge and has a 51mm (2") long arm with a hole to accept tubing up to 9.5 mm (3/8") O.D. Autoclavable.
|
This convenient holder clips onto the edge of a beaker or other vessel and holds a thermometer vertically near the side of the container for safe, easy reading. The thermometer is held in place by small “fingers” that will expand to accommodate
|
Weighted holder grips the beaker or flask firmly in four stainless steel prongs flared out for easy use. The Vikem™ vinyl-coated lead ring secured beneath keeps the beaker immersed in water, provides a low center of gravity and allows water to circulate
|
|
|
|
Dialysis Bag Holder
|
|
The Original Hot Hand Protector
|
|
Hot Hand® Protector - 2 Colors
|
|
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
Suspend dialysis bags in large beakers with these strong clips. Just slide the bag into the slot and clip onto the edge of the beaker. The molded polypropylene surface may be marked with identifying sequence numbers.
|
Hot Hand® Mitts provide superior protection when handling hot or cold objects. Made of strong silicone rubber which resists tearing,
|
Now available in vibrant Sky Blue color! The Hot Hand® Protector is one size, 10cm W x 19cm H (3-7/8” W x 7-1/2” H) and has a pocket at each end; one for the thumb and the other for the other fingers. Concaved tipped studs on the surface...
|
|
|
