|
15ml and 50ml Conical Tube Holder
|
|
Poxygrid® 50ml Centrifuge Tube Holder
|
|
Radiation Dots
|
|
Poxygrid® 50ml Centrifuge Tube Racks - 3 Sizes
|
|
50ml Centrifuge Tube Ice Rack/Tray
|
Usually Ships in 24 Hours
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
Scienceware® 15ml and 50ml Conical Tube Holder.
Move tube and rack with one hand, insert or remove tube from the holder with one hand. Support a either a 15 or 50ml conical tube while allowing a view of the tube’s entire contents. Patent pending
• Steam autoclavable at 121°C (250°F)
• Chemical-resistant polypropylene
|
This holder solves the problem of where to put a single 50ml conical tube where it will not roll or spill. The holder is formed of
|
Use these stick-on dots to identify microcentrifuge tubes and other vessels. The dots peel off as needed and will stick on plastics and glass for easy
|
Made of steam autoclavable, epoxy-coated steel wire, these racks hold 50ml plastic centrifuge tubes in 30mm square holes.
|
This heavy duty all-polypropylene rack provides efficient and extended cooling of twenty-eight 15 ml or 50 ml centrifuge tubes in
|
|
|
|
Microcentrifuge Tube Ice Racks - 2 Sizes
|
|
Round Floating Bubble Racks - 2 Sizes
|
|
Rimless Centrifuge Tubes - 2 Sizes
|
|
Centrifuge & Test Tubes
|
|
Micro Sample Tube
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
These two piece racks are molded of high-impact polystyrene with a lower section tray that holds water or crushed ice. Dimensions
|
The perfect rack for use in microbiology and immunology labs. Made especially for use with beakers, the space-saving round
|
For use in centrifuges up to 50,000 g without refrigeration, these polypropylene tubes are rimless, round-bottomed, and autoclavable at 121ºC (250ºF).
|
Graduated conical Polyethylene tube with rim are perfect for refrigerated use and at temperatures up to 52º C (125º F) continuously. Steam autoclavable to 121ºC (250º F).
|
This micro sample tube has a captive plug and will withstand the forces of an microcentrifuge. Made of Polypropylene and is steam autoclavable at 121ºC (250º F ). Dimensions: 42mm H x
|
|
|
|
Hand Centrifuge
|
|
Vortexer Attachments for Microcentrifuge Tubes - 2 Sizes
|
|
Microcentrifuge Tube Opener
|
|
Micro Centrifuge Sample Pestles - 2 Sizes
|
|
Pestle and Matched 1.5ml Tube
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
This hand-driven centrifuge comes with a table-mounting clamp. Features a painted metal body, and metal head. Comes complete with 4 each aluminum shields. Easily disassembles for storage in specially designed foam box.
|
These Vortexer Attachments securely hold either a maximum of 8 or 20 microcentrifuge tubes, 1.5ml capacity, in a disk for simultaneous vortexing. Tube contents are mixed by holding
|
Easily open microcentrifuge tubes with this double-ended tool. Works for all sizes of tubes. One end opens standard 1.5, 2 and 2.2ml tubes while the other end has a forked blade that opens
|
Ideal for resuspending lyophilized products or precipitates, or for homogenizing samples in a microcentrifuge tube. The Teflon® pestle is mounted on a stainless steel shaft, 3.2mm
|
Disposable polypropylene pestles are used to homogenize or resuspend precipitates such as protein or DNA pellets in buffer solutions or for grinding plant or other tissue samples. The
|
|
|
|
Double Ended Pestles - 2 Types
|
|
Microtube Cutter
|
|
Tip 'N' Tube Dispenser
|
|
Tissue Grinder
|
|
Microcentrifuge Tube Ice Rack
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
One end fits the 1.5ml microcentrifuge tube and the other end fits the 0.5ml tube. Overall length is 152mm (6").
|
This practical tool safely and easily removes the tips from plastic micro tubes and eliminates the hazards of using razor blades or knives. The cutter makes it easy to retrieve
|
Keep a handy supply of pipettor tips, micro tubes, centrifuge tubes and other small items at your fingertips. Pour "bulk" bags of up to 200 1.5ml microcentrifuge tubes into the top of this
|
Polypropylene tissue grinder efficiently homogenizes tissue and cells in tests, centrifuge, and grinding tubes. The cone tip tapers from 8.2mm (.325") down to 2.9mm (.115") in a length
|
This two piece rack is designed for long life and heavy usage. Larger volume benchtop processing of up to fifty 1.5 ml tubes (or other tubes with a diameter less than 12 mm) can be
|
|
|
|
50ml Conical Tube Holders
|
|
Poxygrid Labware Drain Stand
|
|
|
|
|
|
|
Usually Ships in 24 Hours
|
|
|
Usually Ships in 24 Hours
|
|
|
|
|
|
This handy new base securely holds a 50mL conical centrifuge tube in place, freeing hands for critical tasks such as pipetting and adjustment of instrumentation. The result is better control
|
Scienceware® 50mL Tube Holder, Grip Style securely holds the tube in the base and moves with the tube when it is lifted from the bench top. Tubes can be removed by holding the
|
|
|
