|
Beaker Tongs
|
|
Universal Clamp with Holder
|
|
Burette Clamps
|
|
Suspension Clamps
|
|
Burette Clamp
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Beaker tongs feature strong zinc-plated steel construction with flat riveted joints and vinyl coated sleeves that open to 7”. Tongs can handle beakers from 50ml
|
Clamp features vinyl coated three pronged jaws that open up to 2-1/4”" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.
|
This clamp features plastic covered spring jaws, accepts burets up to 35mm OD, and support rods up to 1/2 inch OD.
|
Thermometer Clamp features adjustable 360 degree rotating jaw, for attaching up to 1/2" diameter rods and thermometers. Clamp with Hook can be rotated
|
This single burette clamp features one flat and one V-shaped jaw, designed for holding small objects. Jaws open 3/16” to 1-3/8”, and are vinyl coated. Fits rods
|
|
|
|
Hook Collar Clamps
|
|
3-Prong Clamp with Steel rod
|
|
Pendulum Clamp
|
|
Clamp Holders
|
|
Wire Tubing Clamps
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
For suspending pulleys, balances, etc. from support rods, or cross members.
|
Top – ECLJ03 3-pronged clamp, 10" long, prongs covered with rubber tubing. Bottom – CLEX01 Extension clamp with cork covered jaws, 8" total length
|
Connect this clamp to any support rod to set up three separate pendulum demonstrations. Includes individual cord clamps.
|
For rods to 19mm in diameter.
|
Made of steel wire, nickel plated.
|
|
|
|
Test Tube Clamps
|
|
C-Clamps
|
|
Burette Clamp (Fisher Style)
|
|
Funnel Holder
|
|
Seperatory Funnel Holder
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Self-closing, available in Brass Wire, or Brass Finish.
|
Our clamps feature strong malleable iron frames that are painted to reduce corrosion.
|
These clamps are molded in polypropylene making them completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the
|
Made of polypropylene, these corrosion free funnel holders can hold funnels with diameters 3" to 6". The extra plate provided can be placed to hold funnels
|
This non-corrosive separatory funnel holder, molded in polypropylene, has a front opening which provides clear view of the solution and allows unobstructed
|
|
|
|
Clay Pipe Triangles
|
|
Alcohol Burner Stand
|
|
Support Stands with Rods
|
|
Support Stands - cast iron
|
|
Two-Hole Support Stands
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Quality clay pipe on heavy gauge galvanized steel wire. Individually packed in poly bags, and chip board boxes.
|
Made of steel wire, zinc plated. Stand has a heavy wire gauze top. Overall height is 5", to accommodate all sizes of burners. Also available with a ceramic
|
SUPPORT STANDS WITH RODS
Stamped steel bases, with black enamel finish. Removable, zinc plated steel rods. Bases and Rods are also available individually.
|
Heavy cast iron bases with black enamel finish. Each base includes a removable zinc plated steel rod..
|
Stamped steel bases featuring 2 tapped holes for the rods. Hole at center of the shorter side is for standard ring stand use. Hole at center of the longer side
|
|
|
|
Triangular Supports with Rods
|
|
Support Stands, plastic
|
|
Support Stands with Rings
|
|
Tripod Stands
|
|
Pipette Stand (94 Pipettes - Rotary)
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Heavy cast-iron triangular bases, with black enamel finish, with zinc plated steel rods.
|
These non-corrosive, molded support stands provide excellent alternatives to metal ones. Even the metallic rod has a polypropylene covering making it
|
Each set contains a stamped steel base and rod, along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes, with your
|
Cast Iron ring with black enamel finish. Detachable zinc plated legs. Legs are inter-changeable. Tripod Stands can be ordered in any combination of Ring OD,
|
Molded in polypropylene, this stand holds a maximum of 94 pipettes and rotates on central vertical axis for convenient selection of any particular pipette. Central
|
|
|
|
Pipette Stand (Vertical)
|
|
Pipette Stand (Horizontal)
|
|
Heavy Support Stands with Rods
|
|
Support Rings, Steel Rod
|
|
Support Rings, Cast Iron
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
This is a polypropylene, stable, noncorrosive, detachable stand which can hold 28 pipettes with maximum diameter of 9/16". The heavy base measures 9" in
|
This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Molded in polypropylene, this autoclavable stand has two sides which are
|
These stamped steel bases feature an added steel plate on the back, wich makes them about 50% heavier than regular stamped steel bases. The steel plate
|
Support rings with steel rods
|
Support rings with cast iron
|
|
|
|
Extension Support Rings
|
|
Tripod Stands with Concentric Rings
|
|
Extension Clamp with Steel rod
|
|
Brass Body Clamp Holder
|
|
Cast Zinc Clamp Holder
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Zinc plated STEEL extension rings. Rod diameter is 5/16", overall length is 12".
|
Cast Iron ring with black enamel finish. Detachable zinc plated legs. Legs are inter-changeable. Tripod Stands can be ordered in any combination of Ring OD,
|
Top – ECLJ03 3-pronged clamp, 10" long, prongs covered with rubber tubing. Bottom – CLEX01 Extension clamp with cork covered jaws, 8" total length
|
For rods to 19mm in diameter.
|
For rods to 19mm in diameter.
|
|
|
|
Screw Clamp
|
|
Spring Tubing Clamp - 2 Sizes
|
|
Tubing Clamp
|
|
Swing Jaw™ Tubing Clamp - 3 Sizes
|
|
Screw-Clamp Compressor
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Accepts tubing up to 14mm (1/2") O.D. Autoclavable at 121ºC (250ºF) Resistant to acids, alkalis, and organic solvents. 3 per bag
|
Perfect for all flexible tubing, this positive-action, self-closing clamp opens by squeezing the handles together. Made of chemical and stain-resistant Delrin® plastic and stainless steel.
|
Strong acetal plastic clamp with serrated jaws provides secure closure on tubing with a wall of .82 mm (1/32 ") or thinner. The open clamp slides over
|
Strong, simple, and safe to use clamps that can be installed and removed without disconnecting tubing. Zinc-plated steel provides a non-slip closure
|
Strong, open-jaw type nylon tubing clamp accepts any tubing up to 6.4mm (1/4") O.D. Angled jaws prevent tube from slipping out.
|
|
|
|
Tubing Clamp, Mini - Under 4.7mm
|
|
Tubing Mid Range
|
|
Tubing Maxi Clamp
|
|
Klik Klip™ Wire and Tubing Clip
|
|
Economy Support Stand, Polycarbonate
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Mini Clamp provides simple on/off control. Use for tubing under 4.7mm (3/16") O.D. 100 per bag, 10 bags per case Mid Range Clamp have 15 clamp positions for flow control.
|
15-position stepped adjustment controls flow from full open to complete closure. Fits tubing from 3.2 to 11mm (1/8 to 7/16") O.D.
|
Maxi Clamp: For up to 19mm (3/4") O.D., this clamp has a 12-position ratchet control from full open to complete closure.
|
These individual clips neatly hold computer wires and tubing such as flexible vinyl, rubber, silicone, latex, polyurethane or Teflon® used in pump
|
A sturdy and stable molded polycarbonate base supports a 46 cm (18") tall stainless steel support rod. Two hex nuts secure the 7.9 mm (5/16") diameter
|
|
|
|
Support Stand With Center Rod
|
|
Polypropylene Burette Clamps - 2 Types
|
|
Burette Clamp - Spring Action
|
|
Bosshead
|
|
Funnel Holders - 2 Types
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
|
Excellent for use in severe corrosive conditions, these stands have no exposed metal parts - all surfaces are polypropylene. Measuring 20 x 30cm
|
These non-corroding, polypropylene burette clamps do not obscure graduations. Burette is held firmly in place by rubber pads and
|
Spring-action opening clamp with a flat wing-head screw for tightening. The stainless steel jaws are covered with rubber tubing and have an opening range of 0 to 25mm (1"). Overall clamp length is 22cm (9").
|
This open sided stainless steel bosshead accepts rods up to 13mm (1/2") diameter. Rods are held at right angles to one another with flat wing head clamping screws.
|
Non-corrosive high density polyethylene funnel holder and clamp includes two bushings for 12.5mm (1/2") or 9.5mm (3/8") diameter support rod. Outer ring
|
|
|
